Electric transport properties measured by Van der Pauw resistivity experiments of Low-Temperature Molecular Beam Epitaxy (LT-MBE) GaAs samples are used to identify a method to improve the resistivity of GaAs material. We present results on five samples grown at 265, 310, 315, 325, and 345 ºC. The electric measurements were carried out at temperatures ranging from 130 to 300 K. In this temperature range the dominant transport process is identified as variable range hopping. The hopping parameter plotted against the growth temperature is shown to present a maximum. The mechanisms responsible for this behavior are discussed in relation to the compensation ratio.

Coherent emission efficiency in a 100Å GaAs SQW microcavity was enhanced one order when pumped resonantly at 10 K, compared to the off-resonant excitation. The usual kink observed in the exciton emission linewidth as well as in the emission intensity in relation to the pump power, changes smoothly instead of the usual abrupt kink observed in the off-resonant microcavity laser. In addition, polarization measurements show a correlation relationship between the pump light polarization and the cavity emission polarization.

In this work several structural and chemical properties of self-assembled InAs islands grown on GaAs(001) are studied using surface x-ray scattering with synchrotron radiation. The technique of x-ray diffraction under grazing incidence condition was employed to differentiate coherent and incoherent islands. We used a model of a strained pyramidal island to interpret the x-ray results and correlate size and strain-state of these islands. The degree of GaAs interdiffusion in the islands was inferred from the variation of volume of the unit cell. The Poisson's ratio of the two materials involved establishes a limit of tetragonal distortion for this material. Any variation in this distortion is associated with the presence of Ga inside the islands.

We have observed Low Frequency Oscillations (LFO) in a GaAs sample grown by molecular beam epitaxy (MBE) at 300 °C as a function of applied electric field, temperature and illumination intensity. Time series of the oscillations for different values of the applied electric field at room temperature were obtained. We have also obtained the jxE characteristics as a function of temperature and light intensity. We were able to control the LFO using three experimental parameters, the electrical field, which controls the oscillation frequency, and the temperature and illumination intensity, which control the carrier density and field-enhanced trapping. We were able to identify the LFO dependence on the carrier density and on the field-enhanced trapping.